Is the calibration data saved in the LED modules or in the receiver cards?
Calibration data is saved in the LED module. When powering on the panels, the receiver card will read the calibration data from the LED modules and then use it in the calibration. For Evision the calibration data is stored on the LED module, but auto-readback on startup has been disabled for technical reasons.
News
-
17 Dec.
ROE Visual Celebrates Bold Designs and Connections at LDI 2024
LDI 2024 was more than just a showcase of LED technology—it was a celebration of the creativity and collaboration that define this industry. Over three busy days, ROE Visual’s booth brought together i...